สินค้าลดราคา

4,500.00฿ 3,293.00฿

In Stock

Sika Bituseal 1500 SA Smooth Top 1 ม.x15 ม. (หนา 1.5มม.)

  • แผ่นกันซึมประเภทโพลีเมอร์บิทูเมนดัดแปลง ชนิดมีกาวในตัวเสริมความแข็งแรงด้วยแผ่นโพลีอทิลีน

อัตราการใช้ :

เงื่อนไขการสั่งซื้อ

1.ราคาดังกล่าวเป็นราคาสินค้ารวมภาษีมูลค่าเพิ่ม

2.ราคาดังกล่าวสำหรับปริมาณยอดสั่งซื้อขั้นต่ำตั้งแต่ 15,000 บาท/บิล ขึ้นไป

หากคุณซื้อผลิตภัณฑ์นี้คุณจะได้รับ 165 คะแนน! มูลค่า 16.50฿!
เปรียบเทียบสินค้า

Sika Bituseal 1500 SA Smooth Top 1 ม.x15 ม. (หนา 1.5มม.)

Sika Bituseal 1500 SA Smooth Top ซิก้า บิทูซีล 1500 เอสเอ สมูธ ท็อป 1 ม.x15 ม. (หนา 1.5มม.) แผ่นกันซึมประเภทโพลีเมอร์บิทูเมนดัดแปลง ชนิดมีกาวในตัวเสริมความแข็งแรงด้วยแผ่นโพลีอทิลีน

 

แผ่นกันซึมประเภทบิทูเมนดัดแปลงชนิดมีกาวในตัว ผิวหนาเรียบ

การใช้งาน

    สามารถใช้สำหรับกันซึมในส่วนของ :

  •  ชั้นใต้ดิน
  •  กำแพงกันดิน
  •  อุโมงค์

คุณประโยชน์

  • ติดตั้งง่าย
  • มีการยึดเกาะกับพื้นผิวได้ดี
  • มีความสามารถทนสารเคมี(สอบถามเทคนิคของบริษัท)
  • มีความสามารถคงรูปร่างที่ดีเมื่อรับแรง

สี

สีดำ

ขนาดบรรจุ

1 x 15 เมตร/ม้วน

DESCRIPTION
Sika® BituSeal-1500 SA Smooth Top is a self-adhesive polymer modified bituminous sheet membrane reinforced with a cross-laminated high strength HDPE film.
USES
Sika® Bituseal -1500 SA Smooth Top can be used as a waterproofing membrane on:
▪ Vertical walls
▪ Foundations and basements
▪ Retaining walls
▪ Terraces and balconies
▪ Roof under layments
CHARACTERISTICS / ADVANTAGES
▪ Cold applied ▪ Self-adhesive, easy to apply
▪ Excellent adhesion to vertical and horizontal surfaces Provides dimensional stability, high tear strength, puncture and impact resistance
▪ No gas torch required
▪ Centrolled thickness
APPLICATION INSTRUCTIONS SUBSTRATE PREPARATION
Concrete shall be at least 8 days old. Surfaces must be clean, dry, and free from all traces of loose materials, old coatings, curing membranes, release agents, laitance, oil, greases, etc. Structurally unsound layers and surface contaminants must be mechanically removed by abrasive blast tracking or grinding. Substrates heavily impregnated with oil must be cleaned by torching or suitable solvent cleaning methods. For re-profiling defects on horizontal surfaces a suitable patching mortar is required. The patching mortar should be of cementitious base depending on the scope, particular conditions and requirements of the work. Contact our Technical Service Department for further information.
APPLICATION METHOD / TOOLS
First apply SikaProof® Membrane as a primer onto the substrate and allow to dry. Only apply the primer where the Sika® BituSeal-1500 SA Smooth Top is to be applied. Begin applying the Sika® BituSeal-1500 SA Smooth Top when the primer is tack free. Place the pieces of membrane on the surface to be waterproofed and ensure that laps of 50 mm on the side, and 50 mm at the ends, are maintained. Cut the membrane to desired shape if needed. Peel off the release film and place the membrane, ensuring that overlap requirements are kept. Press the membrane from the center towards the edges to expel entrapped air.
IMPORTANT CONSIDERATIONS
A slip sheet should be used on the membrane when applying a solid topping over the top ▪ An approved membrane protection board should be installed over the membrane prior to any backfilling
Back to Top