สินค้าลดราคา

5,200.00฿ 3,954.00฿

In Stock

Sika Bituseal 2000 SA 1 ม.x15 ม. (หนา 2มม.)

Sika Bituseal 2000 SA ซิก้า บิทูซีล 2000 เอสเอ 1 ม.x15 ม. (หนา 2มม.) แผ่นกันซึมประเภทโพลีเมอร์บิทูเมนดัดแปลง ชนิดมีกาวในตัวเสริมความแข็งแรงด้วยแผ่นโพลีอทิลีน

 

 

การใช้งาน

    Sika® Bituseal -2000 SA สามารถใช้เป็นแผ่นกันซึมสำหรับ:

  • หลังคาทรงแบนราบหรือหลังคาทรงแหลม
  • งานฐานรากและชั้นใต้ดิน
  • กำแพง
  • ระเบียงและดาดฟ้า
  • อุโมงค์, รถไฟใต้ดิน

 

สี

สีดำ

ขนาดบรรจุ

1 x 15 เมตร/ ม้วน

 

เงื่อนไขการสั่งซื้อ

1.ราคาดังกล่าวเป็นราคาสินค้ารวมภาษีมูลค่าเพิ่ม

2.ราคาดังกล่าวสำหรับปริมาณยอดสั่งซื้อขั้นต่ำตั้งแต่ 15,000 บาท/บิล ขึ้นไป

3.ราคาดังกล่าวเป็นราคารับเอง

หากคุณซื้อผลิตภัณฑ์นี้คุณจะได้รับ 198 คะแนน! มูลค่า 19.80฿!
เปรียบเทียบสินค้า

Sika Bituseal 2000 SA 1 ม.x15 ม. (หนา 2มม.)

Sika Bituseal 2000 SA 1 ม.x14 ม. (หนา 2มม.)

Sika Bituseal 2000 SA ซิก้า บิทูซีล 2000 เอสเอ 1 ม.x15 ม. (หนา 2มม.) แผ่นกันซึมประเภทโพลีเมอร์บิทูเมนดัดแปลง ชนิดมีกาวในตัวเสริมความแข็งแรงด้วยแผ่นโพลีอทิลีน

 

 

การใช้งาน

    Sika® Bituseal -2000 SA สามารถใช้เป็นแผ่นกันซึมสำหรับ:

  • หลังคาทรงแบนราบหรือหลังคาทรงแหลม
  • งานฐานรากและชั้นใต้ดิน
  • กำแพง
  • ระเบียงและดาดฟ้า
  • อุโมงค์, รถไฟใต้ดิน

คุณประโยชน์

  • สามารถยึดเกาะพื้นผิวได้ดีเยี่ยมทั้งในแนวตั้งและแนวนอน
  • มีความคงตัวดีเยี่ยม เมื่อต้องสัมผัสกับภาวะบีบคั้นจากภายนอก เช่น การเคลื่อนไหว และอุณหภูมิที่ร้อนหรือเย็นจัด
  • มีกาวในตัว,ใช้งานง่าย
  • ทนทานต่อสารเคมีได้ดี
  • ทนทานต่อการกระแทกได้ดี

สี

สีดำ

ขนาดบรรจุ

1 x 15 เมตร/ ม้วน

 

 

บทความที่เกี่ยวข้อง (Click)

 

 

DESCRIPTION

Sika® BituSeal-2000 SA is a self-adhesive polymer modified bituminous sheet membrane reinforced with

a cross-laminated high strength HDPE film.

 

USES

Sika® BituSeal-2000 SA can be used as a waterproofing membrane on:

▪ Vertical walls

▪ Foundations and basements

▪ Retaining walls

▪ Terraces and balconies

▪ Roof under layments

 

 

CHARACTERISTICS / ADVANTAGES

▪ Cold applied

▪ Self-adhesive, easy to apply

▪ Excellent adhesion to vertical and horizontal surfaces Provides dimensional stability, high tear strength, puncture and impact resistance

▪ No gas torch required ▪ Centrolled thickness

 

APPLICATION INSTRUCTIONS SUBSTRATE PREPARATION

Concrete shall be at least 8 days old. Surfaces must be clean, dry, and free from all traces of loose materials, old coatings, curing membranes, release agents, laitance, oil, greases, etc. Structurally unsound layers and surface contaminants must be mechanically removed by abrasive blast tracking or grinding. Substrates heavily impregnated with oil must be cleaned by torching or suitable solvent cleaning methods. For re-profiling defects on horizontal surfaces a suitable patching mortar is required. The patching mortar should be of cementitious base depending on the scope, particular conditions and requirements of the work. Contact our Technical Service Department for further information.

 

APPLICATION METHOD / TOOLS

First apply SikaProof Membrane as a primer onto the substrate and allow to dry. Only apply the primer where the Sika® Bituseal -2000 SA is to be applied. Begin applying the Sika® Bituseal -2000 SA when the primer is tack free. Place the pieces of membrane on the surface to be waterproofed and ensure that laps of 50 mm on the side, and 50 mm at the ends, are maintained. Cut the membrane to desired shape if needed. Peel off the release film and place the membrane, ensuring that overlap requirements are kept. Press the membrane from the center towards the edges to expel entrapped air.

Back to Top