สินค้าลดราคา

1,200.00฿ 915.00฿

In Stock

SikaCem Gunite-133 ซิก้าเซ็ม กูนิท -133 ซีเมนต์ส่วนผสมเดียว 25กก./ถุง

  • ซีเมนต์ส่วนผสมเดียวที่มีส่วนผสมของโพลีเมอร์ดัดแปลงและซิลิก้าฟูมโดยไม่ได้ใส่สารเร่งปฏิกิริยา
  • ใช้สำหรับงานคอนกรีตพ่น งานซ่อมแซมคอนกรีต งานอุโมงค์ เป็นต้น

อัตราการใช้ : 22-24 กก./ตรม./ความหนา 10 มม.

 

เงื่อนไขการสั่งซื้อ

1.ราคาดังกล่าวเป็นราคาสินค้ารวมภาษีมูลค่าเพิ่ม

2.ราคาดังกล่าวสำหรับปริมาณยอดสั่งซื้อขั้นต่ำตั้งแต่ 15,000 บาท/บิล ขึ้นไป

3.ราคาดังกล่าวเป็นราคารับเอง

หากคุณซื้อผลิตภัณฑ์นี้คุณจะได้รับ 46 คะแนน! มูลค่า 4.60฿!
เปรียบเทียบสินค้า

SikaCem Gunite-133 ซิก้าเซ็ม กูนิท -133 ซีเมนต์ส่วนผสมเดียว 25 กก./ถุง

คุณสมบัติ

  • ซีเมนต์ส่วนผสมเดียวที่มีส่วนผสมของโพลีเมอร์ดัดแปลงและซิลิก้าฟูมโดยไม่ได้ใส่สารเร่งปฏิกิริยา
  • ใช้สำหรับงานคอนกรีตพ่น งานซ่อมแซมคอนกรีต งานอุโมงค์ เป็นต้น

 

Description

1-component, unaccelerated, cementitious polymer-modified silica-fume based gunite mortar.

 

Applications

A high-performance repair mortar for dry-spray application to concrete, stone and mortar substrates. Suitable for new construction, repairs and maintenance work.

Typical applications include: – Construction of power stations and penstocks

– Tunnels and galleries

– Bridges

– Industrial and residential buildings

 

Advantages

– Ready-for-use, one-component material

– Superior workability – Can be trowelled and screeded after application

– Rapid strength development

– Very high density

– Highly effective carbonation inhibitor

– Excellent adhesion to substrate

– Formulated to minimize dust development

– Coat thickness up to 50 mm in a single application

– Extremely economical in use

– W/C ratio consistently within range 0.34 – 0.38

– Excellent sulphate resistance

 

 

บทความที่เกี่ยวข้อง (Click)

 

Coverage

The rate of coverage depends on the surface texture of the substrate, the location of the area to be sprayed (overhead or vertical) and the thickness of the applied coating. As a general guide, allow 22-24 kg/m2 per 10 mm applied thickness.

 

Surface preparation

Concrete, mortar, stone: surfaces must be clean and free from all traces of loose material, laitance, oil and grease. Iron, steel: surfaces must be clean and free from all traces of oil, grease and rust.

The substrate should be wetted down prior to application. When applying over critical substrates or reinforced concrete damaged by corrosion of the underlying steel, the use of SikaTop® Armatec 110 EpoCem® as a bonding agent is advised.

 

Cleaning

Uncured mortar should be removed from tools with water. To clean dry-spray cement guns simply blow out with compressed air. Once cured, the mortar can only be removed mechanically.

 

Toxicity

This product is classified as non-toxic under the relevant Swiss health and safety codes.

 

 

Back to Top